1. Fully charge your Strack before first use.
2. Turn On your Strack by pressing the power button.
3. Download the My Strack App from Google Play or App Store by scanning below code

4. Install the App, sign up with email.
5. Connect the Strack to your App.
6. Follow the instructions on the App that will help you how to use the Strack.



There are multiple ways you can reach us
• Live Chat on My Strack App -> Go to Menu -> Customer Support
• By Email–
• By Visiting at


Turn ON Strack
Press the button once to Turn on the Strack

Turn OFF Strack
Press and Hold the power button till the Strack vibrates and then release the button to Turn Off


Strack can be worn in two ways based on user preference

 1.  Using Adhesive

2. Using Magnetic Clasp



 Using Adhesive

• Peel off the sticker on device side of the adhesive and stick it to the back of the Strack
• Now peel the other side of the adhesive & stick the Strack firmly to your upper back, directly on your spine


Using Magnetic Clasp

• Place the Strack beneath your clothing just above the spine on your back
• Attach the Magnetic Clasp from top of your clothing



Calibration process helps your Strack to decide your Straight Posture. It is recommended to calibrate your Strack every time you start your posture detection sessions. You can recalibrate your Strack whenever you feel your
slouch posture is not properly identified.

Calibration of the Strack can be done in two ways
1. On Mobile App or
2. On Strack

On Mobile App
• Put the Strack on back as suggested above

• To calibrate from the Mobile App, connect your Strack to the Mobile App
• Get in to your best(straight) posture
• Press Calibrate icon on the home screen and stay still for few seconds till your Strack vibrates three times

On Strack
• Put the Strack on back as suggested above
• Get in to your best(straight) posture
• Put your left hand on the back and double click the power button on Strack
• Stay Still for few seconds till your Strack vibrates three times



Strack can be used independently without Mobile App. The three major functions that are frequently used are inbuilt in the Strack

Function 1 – Turn On/Off Strack

Function 2 – Vibration Alert On/Off. Once Strack is turned On, the power button works like a switch. You can toggle vibration alert on/off by pressing once

Function 3 – Calibration. Strack can be calibrated without mobile app by double clicking the power button.













  • Name - Strack 360° Posture Care Device
  • Net Weight -
  • Battery Capacity -
  • Battery Type - Lithium polymer battery
  • Wireless Connectivity - Bluetooth 4.2 BLE
  • Material – Biocompatible Skin Friendly
  • High Grade Polycarbonate
  • Dimensions – 33 MM * 47 MM * 9 MM
  • OS Support – Android & iOS

For Warranty info please visit


Need help ?
Call us on 9986088762
Scan QR code to get information
on How Strack Works
USA: Federal Communications Commission (FCC) statement
This device complies with FCC part 15 FCC Rules. Operation is subject to the following two conditions: 
1. This device may not cause harmful interference
2. This device must accept any interference,including interference that may cause undesired operation of the device.

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no gua-rantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device
meets the FCC and IC requirements for RF exposure in public or uncontrolled
European Union (EU) 

Simplified EU Declaration of Conformity
Hereby, Dipitr Technologies, Inc. declares that the radio equipment type Model FB401 is in compliance with Directive 2014/53/EU.

Déclaration UE de conformité simplifiée
Dipitr Technologies, Inc. déclare par la présente que les modèles d’appareils radio FB401 sont conformes à la Directive 2014/53/UE.

Dichiarazione di conformità UE semplificata
Dipitr Technologies, Inc. dichiara che il tipo di apparecchiatura radio Modello FB401 è conforme alla Direttiva 2014/53/UE.

Vereinfachte EU-Konformitätserklärung
Dipitr Technologies, Inc. erklärt hiermit, dass die Funkgerät Typen Modell FB401 die Richtlinie
2014/53/EU erfüllen.

Declaración UE de Conformidad simplificada Por la presente,
Dipitr Technologies, Inc. declara que el tipo de dispositivode radio Modelo FB401 cumple con la Directiva 2014/53/UE


Disposal and Recycling Information

The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines.


Built-in battery precautions

• Do not attempt to replace your Strack's battery. It is built-in and not changeable.
• Charge the battery in accordance with the instructions supplied with this guide.
• Charge your Strack using a certified computer, powered hub or power supply
• Do not attempt to force open the built-in battery